CC-501, but Resetting Account fixes for one time OSU

FI is KFCU,
OSU gets CC-501 almost immediately
Resetting even just one of the 16 accounts at the FI allows all accounts to download during the next OSU.

But, next OSU gets the CC-501 again.

What more can I check or do?




CONNLOG.TXT:

==== OSU Start (20210123/19:49:33) ====

==== OSU End (20210123/19:49:44) ====

OFX Log:
================ (27.1.30.21) (20210123/19:30:06) ===================

==== OSU Start (20210123/19:32:04) ====

==== OSU End (20210123/19:33:11) ====

==== OSU Start (20210123/19:49:33) ====

==== OSU End (20210123/19:49:44) ====

Best Answers

  • Quicken Anja
    Quicken Anja Moderator mod
    edited January 2021 Answer ✓
    Hello @TXShooter,

    Thank you for reaching out to the Community to tell us about your issue, though I apologize that you are experiencing this.

    As stated in this support article regarding error CC-501, if the issue persists for more than 24 hours, you will need to contact Quicken Support directly for further assistance.

    Our support agents will need to collect and review your log files to further investigate the issue and will then likely be required to file an escalation in order to have it successfully resolved.

    I do apologize for being unable to resolve this issue from here in the Community.

    Click here to review Quicken Support's hours of operation.

    -Quicken Anja
    Make sure to sign up for the email digest to see a round up of your top posts.

  • TXShooter
    TXShooter Member ✭✭✭
    Answer ✓
    It helped that I changed it from a deposit to a payment.

Answers

  • Quicken Anja
    Quicken Anja Moderator mod
    edited January 2021 Answer ✓
    Hello @TXShooter,

    Thank you for reaching out to the Community to tell us about your issue, though I apologize that you are experiencing this.

    As stated in this support article regarding error CC-501, if the issue persists for more than 24 hours, you will need to contact Quicken Support directly for further assistance.

    Our support agents will need to collect and review your log files to further investigate the issue and will then likely be required to file an escalation in order to have it successfully resolved.

    I do apologize for being unable to resolve this issue from here in the Community.

    Click here to review Quicken Support's hours of operation.

    -Quicken Anja
    Make sure to sign up for the email digest to see a round up of your top posts.

  • Quicken Anja
    Quicken Anja Moderator mod
    @TXShooter If you haven't already, I suggest you try switching from the QCS channel to the FDS channel. Please, follow the steps below in order to do so.
    1. Hold down F4 on your keyboard and select Help > About Quicken
    2. Click Change channel on the screen that pops up if it shows you are currently using the QCS channel (see below).


    I hope this helps!

    -Quicken Anja
    Make sure to sign up for the email digest to see a round up of your top posts.

This discussion has been closed.