Quicken error messages display so big they cannot be closed

mcscully

The error messages are so big they do not display accept buttons or the X to close out. I have to close down with task manager. VERY annoying. Window resizung attemps fail. Using Windows 10.

Chris_QPW

To close one of those windows select Alt+F4.

And note that if the dialogs are too big for your screen you are using a Windows scaling and/or use Large Fonts combination that is outside of what Quicken Windows was designed for.
Here are the requirements:


These are at 100% Windows scaling.
If you are using a Windows scaling other than 100% you have to do a bit of math to see what the requirements are.

At 125% you would multiple the numbers above by 1.25 to see the minimum resolution your screen has to be running at to fit.
1024 * 1.25 = 1280, 768 * 1.25 = 960.
Large fonts: 1280 * 12.5 = 1600, 1024 * 1.25 = 1280

splasher

With the message selected, have you tried ALT+F4?

Chris_QPW

To close one of those windows select Alt+F4.

And note that if the dialogs are too big for your screen you are using a Windows scaling and/or use Large Fonts combination that is outside of what Quicken Windows was designed for.
Here are the requirements:


These are at 100% Windows scaling.
If you are using a Windows scaling other than 100% you have to do a bit of math to see what the requirements are.

At 125% you would multiple the numbers above by 1.25 to see the minimum resolution your screen has to be running at to fit.
1024 * 1.25 = 1280, 768 * 1.25 = 960.
Large fonts: 1280 * 12.5 = 1600, 1024 * 1.25 = 1280