R53.16 has a problem with Specify Lots.
After installing R53.16 I noticed the Specify Lots has a issue with the Gain/Loss Column not showing. The only solution tech support had was to have me reinstall R52.33.
I will monitor this problem.
Comments
-
I see Gain/Loss in R53.16 but it's a bit cut off on the right. Maybe a screen resolution issue?
Quicken user since version 2 for DOS, now using QWin Premier (US) on Win10 Pro.
0 -
Thanks for the input. I need to do some more testing with backup system
0 -
If I do a Sell transaction of Microsoft (over 1000% gain since original buy), mine shows 0.00 for every lot:
So, unlike OP, Gain/Loss is showing, but is not showing correct values.
Running R53.16 on Win11, Quicken Premier.
-splasher using Q continuously since 1996
- Subscription Quicken - Win11 and QW2013 - Win11
-Questions? Check out the Quicken Windows FAQ list0 -
@splasher that is the normal initial state of Specify Lots. It shows zeros until the user specifies some shares to sell. In your image, no shares have yet been selected for sale.
Quicken user since version 2 for DOS, now using QWin Premier (US) on Win10 Pro.
0 -
This window should have been made resizable.
Signature:
This is my website: http://www.quicknperlwiz.com/0 -
I am waiting for a technical response on the Specify Lot issue with update R53.16
0 -
You aren't going to get it. That isn't the way this forum works.
Signature:
This is my website: http://www.quicknperlwiz.com/0 -
Then, contact Quicken Support by following this link: https://www.quicken.com/support#contact-support
This is a user-to-user help forum, the techies don't visit here.
-splasher using Q continuously since 1996
- Subscription Quicken - Win11 and QW2013 - Win11
-Questions? Check out the Quicken Windows FAQ list0 -
They don't visit Quicken Support either at least not until the second or third level escalation, which I doubt will ever happen for such a problem. Note that the @Ronald1955 posted that it was Quicken Support that told them to downgrade to the previous version.
Signature:
This is my website: http://www.quicknperlwiz.com/0 -
@Ronald1955 show us a screen shot of what you're seeing.
Quicken user since version 2 for DOS, now using QWin Premier (US) on Win10 Pro.
0 -
I am having the same problem since R53. See other thread for good screen shot of the problem
0 -
Hi Ronald1955 ,
Not fix, but reinstall R52.33. Take a screenshot of it working. Upload your Logs and picture to Quicken Support using Report a problem..
Reinstall R53.16 . Duplicate the problem. Take screenshot of what is working with both pictures to Quicken Support using Report a Problem.
You can attach different screenshots, as long as it is under 100 MB total. This way, had been available earlier in the year.
thecreator - User of Quicken Subscription R53.16 USA
Windows 10 Pro 32-Bit Build 19045.3693
Windows 10 Pro 64-Bit Build 19045.3754
0
